Filter
Top Products
Xerox DP 820 User’s Guide 19
User Controls
On-Screen Display (OSD) Menus
The On-Screen Display (OSD) menus provide the options to make
image adjustments and change a variety of settings.
The menus can be displayed only when an input source is
connected to the projector. If the source is a computer, you can
make changes to the Display settings, and if the source is a video
device you can make changes to the Video settings. The projector
automatically detects the type of input source.
Displaying the OSD Main Menu and Selecting Settings
1. To display the OSD Main Menu, press the Menu button on the
remote control, or the Menu/Enter button on the projector’s
control panel.
2. To close the OSD Main Menu, press the Menu or Menu/Enter
button again.
The OSD Main Menu closes after a few seconds if you don’t
select from one of the menus. Use the OSD Timeout setting on
the Advanced menu to set how long the menu remains on the
screen before automatically closing.
3. To select one of the menus on the OSD Main menu, press
the buttons.
4. To view a selected menu press the button.
5. Press the buttons to toggle through the options on a
menu.
6. Press the buttons to adjust the selected option.
7. To accept a new setting from the projector’s control panel,
press the button to go back to the OSD Main Menu and then
press the Menu/Enter button again.
To accept a new setting from the remote control, press the
Menu button.
The OSD Main Menu closes and your new settings are in
effect.
NOTE: The menus in this section show typical settings, but the
actual settings you see may differ.