Filter
Top Products
Xerox DP 820 User’s Guide 9
Connecting the Projector
Connecting the Projector to a Composite Video Source
The typical connection for a Composite Video source is a DVD
player or VCR.
1. Make sure the projector and video source device are turned off.
2. Plug the yellow Composite Video cable into the yellow video
port on the video source device.
3. Plug the other end of the yellow video cable into the yellow
Video port on the back of the projector.
4. Plug the red and white connectors on the Audio cable into the
corresponding red and white ports on the video source. Then
plug the other single end of the cable into the Audio port on the
projector.
5. Plug the power cord into the projector and then into an
electrical outlet.
6. Turn on the projector first, and then the video source.
7. If you don’t see an image, or if you have multiple video sources
connected to the projector simultaneously, press the Source
button on the projector’s control panel, or remote control, to
switch to the input source.
Audio Cable
Composite Video Cable