Filter
Top Products
Troubleshooting
9.16
[Paper Jam 2]
Check Inside
Paper has jammed in the
paper exit area.
Clear the jam. See page 9.9.
[Power Failure] Power has turned off
then on and the
machine’s memory has
not been saved.
The job which you were trying to
do before the power failure must
be completely re-done.
Priority Fax
Function Full
The priority fax jobs
queue is full.
Cancel unnecessary priority fax
jobs.
Retry Redial? The machine is waiting
for a specified time
interval to redial a
previously busy station.
You can press
Enter
to
immediately redial, or
Stop/
Clear
to cancel the redial
operation.
[Stop Pressed] The
Stop/Clear
button
has been pressed during
a copy or fax operation.
Try again.
[Toner Empty] The toner cartridge has
run out. The machine
stops printing.
Replace the toner cartridge with a
new one. See page 8.8.
N
OTE
: A used cartridge will not
reset this message.
[Toner Low] The toner is almost
empty.
Take out the toner cartridge and
gently shake it. By doing this, you
can temporarily reestablish
printing operations.
Display Meaning Suggested solutions