Filter
Top Products
Printing From a Macintosh
(WORKCENTRE PE120I ONLY)
C.2
Installing Software for Macintosh
The PostScript driver CD-ROM that came with your machine
provides you with the PPD file to use the PS driver, Apple
LaserWriter driver, for printing on a Macintosh computer.
Refer to the table below for the driver available for your
machine.
Verify the following before you install the software:
1
Connect your machine to the computer using the USB cable
or the Ethernet cable. For details, see page 2.12 and
page 2.14.
2
Turn on your computer and the machine.
3
Insert the PS driver CD-ROM which came with your
machine into the CD-ROM drive.
4
Double-click the
Xerox_MFP
on your Macintosh desktop.
5
Double-click the
Installer
folder.
6
For Mac OS 8.6~9.3, double-click the
Xerox WC PE120
Series_Classic
icon.
For Mac OS 10.1~10.3, double-click the
Xerox WC PE120
Series_OSX
icon.
Your Machine Available Driver Connection
WorkCentre
PE120i
Mac OS 8.6~9.2 Network interface
Mac OS 10.1 ~
10.3
USB interface,
Network interface
Item Requirements
Operating system Mac OS 8.6 ~ 9.2/10.1~ 10.3
RAM
Mac OS 8.6~9.2 64 MB
Mac OS 10.1 ~ 10.3 128 MB
Free disk space 200 MB