Filter
Top Products
Getting Started
2.27
2
You can set the length of time for which the scan lamp waits
after a scan job is completed before it switches to the power
save mode.
1
Press
Menu
until “Machine Setup” appears on top line of
the display.
2
Press the scroll button (
W
or
X
)
until “Scan PWR Save”
appears on the bottom line. Press
Enter
.
3
Press the scroll button (
W
or
X
)
until the time setting you
want appears on the bottom line.
The available time options are 0.5, 1, 4, 8, and 12 (hours).
4
Press
Enter
to save the selection.
5
To return to Standby mode, press
Stop/Clear
.