Filter
Top Products
Installation and Setup
36 Xerox
®
WorkCentre
®
4265 Multifunction Printer
User Guide
Configuring the Printer at Setup
Once the printer is assembled, to complete the configuration process, use the Product Enablement Key.
The Product Enablement Key sets the billing mode.
Note: The Product Enablement Key is packaged in a plastic tube contained inside the box with the
printer.
To configure the printer using the Product Enablement Key:
1. Remove the plastic card that contains the Product Enablement Key from the tube.
2. To remove the Product Enablement Key from the plastic card, carefully press it out.
3. Attach the power cord to the printer, plug the cord into an electrical outlet, then turn on the printer.
The Installation wizard starts on the control panel the first time that you turn on the printer.