Using the Control Panel
Chapter 3: Printing ❖ 3-59
Deleting a
Password Job
To delete a password print job sent to the printer and
stored in the optional hard drive, follow these steps:
1
At the Control Panel, press Menu Up or Menu Down
until you see:
2
Press Enter and you will see:
3
Enter your job’s numeric password and you will see:
4
Press Value Up or Value Down and you will see:
5
Press Enter to delete all jobs.
OR:
Press Item Up or Item Down to scroll through the jobs,
then press Enter when the job you wish to delete is
shown. Repeat this step as necessary to delete more than
one job.
6
When done, press On Line.
Menus
Password Menu
Enter password
_xxx
All Jobs =
Print
All Jobs =
Delete