Filter
Top Products
Optional Equipment
Appendix C: Printer Options ❖ C-3
To order any of the equipment listed below, see the
separate Supplies/Options Guide or contact your dealer.
Table C.1 Optional Equipment
Optional Kits Use
Hard disk drive
Allows for secure job and proof job printing, storage of fonts and
macros, and increases the productivity of multiple-page jobs via
electronic pre-collation (
Send Once, RIP Once, and Print Many
).
550 sheet feeder
Additional media feeder and paper cassette. Up to two can be
installed.
Envelope Feeder
Powered envelope feeder for high volume envelope/postcard
printing. Can load up to 75 envelopes or 100 postcards.
Offset Catch Tray
Enables stacking of up to 500 sheets of paper with the ability to
offset successive jobs (or multiple copies within the same job) from
each other. Supplements the standard output bin.
Duplex Module
Allows printing on both sides of the sheet of paper.
Ethernet 10Base2 Card
(network-capable printer only)
Provides 10 MBPS 10Base2 Ethernet network capability for IPX/SPX,
TCP/IP, DLC/LLC, SNMP and EtherTalk protocols.
Token Ring Card
(network-capable printer only)
Provides network capability utilizing IPX/SPX, TCP/IP, DLC/LLC,
SNMP and TokenTalk protocols.
Serial Card
Provides an RS232C interface, using a DB9 connector. The serial
port is bidirectional—i.e., it can receive data from the computer as
well as transmit data from the printer to the computer.
Face up bin
Used as a supplemental bin for output with printed side up.
Table C.1 Page 1 of 2