Using the Control Panel
Chapter 3: Printing ❖ 3-49
System Menu
(continued)
Output Timeout
Determines how many seconds the system will wait after a
bin is filled before directing output to an alternate bin
(available only if optional Offset Catch Tray is installed).
Output Offset
Enables or disables alternately offsetting output from jobs
(available only if optional Offset Catch Tray is installed).
Output Dest
Sets the default paper output destination for PCL and
PostScript jobs (available only if optional Offset Catch Tray is
installed).
Print PS Errors
Controls the use of the PostScript built in error handler or
debugger.
Power Saver
Defines a period of inactivity after which time the printer will
enter a low power state.
Defaults
Sets the type of factory defaults to use when a “Factory
Default” is performed.
Parallel Menu
Allows you to set options for the parallel port connection.
Menu Items Description
Port Enable
Enables or disables the parallel port.
Port Timeout
Sets the time for determining when to end an incomplete
print job and poll the next port in the polling sequence.
Parallel PDL
Sets the default emulation (page description language) for
the parallel port.
Binary PS
Enables or disables the binary mode of PostScript for print
jobs received on this port.
Bidirectional
Enables or disables bidirectional communications through
the parallel port.
Table 3.6 Control Panel Menu Options
(continued)
Menu Description
Table 3.6 Page 6 of 14