Filter
Top Products
Operational Safety
Safety Notes ❖ xi
Operational Safety
Your printer and supplies were designed and tested to
meet strict safety requirements. These include safety
agency examination, approval, and compliance with
established environmental standards.
Your attention to the following safety guidelines will help
to ensure the continued safe operation of your printer.
• Use the material and supplies specifically designed for
your printer. The use of unsuitable materials may result
in poor performance and possibly a hazardous
situation.
• Follow all warnings and instructions marked on, or
supplied with, the printer, options and supplies.
• Place the printer in a dust free area where the
temperature range is 41° F to 95° F (5° C to 35° C) and
the relative humidity is 15% to 85%.
• Place the printer in an area where there is adequate
space for ventilation, operation and servicing. The
recommended minimal spacing is 24 in. (600 mm) in
front of and behind the printer, and 12 in. (300 mm) on
each side of the printer.