Replacing the Laser Print Cartridge
4-4 ❖ User Guide
To replace the laser print cartridge, follow these steps:
1
If the envelope feeder is installed, power off the printer
and remove the envelope feeder.
2
Remove any paper from the output bin and multi bypass
feeder, and close the multi bypass feeder.
3
Open the front cover all the way until it stops.
4
Slowly lift up and pull out the used laser print cartridge.
To prevent toner stains, place the cartridge on a
surface covered with scrap paper.
5
Remove a new laser print cartridge from its packaging and
shake the cartridge seven to eight times, as shown, to
loosen the toner.
Be sure to shake the laser print cartridge to
distribute the toner inside the cartridge. Print
quality may be degraded if the toner is not evenly
distributed. If the toner has not been properly
freed by shaking the cartridge, you may hear a
noise when powering on the printer, and the
cartridge may be damaged.