Filter
Top Products
Setup Procedures
15
7
77
7 Connect the series A plug of the included USB cable to the USB port of
the interface card.
Notes
• Be sure to connect the drive to the USB port of the interface card. If you connect the drive
to the computer via a hub, the drive may not operate properly.
• When the CRW2200UX drive is connected to a USB 1.1-compliant port on your computer,
it operates in accordance with USB 1.1 standard.
As soon as the CRW2200UX drive is connected to the computer, installing of the
device drivers starts automatically.
Device drivers are only installed the first time the drive is connected to the computer.
For Windows 98 Second Edition
Install the included device drivers.
For details, refer to the separate manual, “Device Driver Installation Guide”, that
came with the CRW2200UX drive.
For Windows Me/2000 Professional
Windows Me/2000 Professional standard device drivers are installed automatically.
Note
The device drivers are installed for each USB port. After connecting the drive to a port, if you
connect the drive to another port, the screen re-displays messages for installing the drivers again.
STEP
2
Install the Device Drivers
USB port
Series A plug
USB cable
(included)