Filter
Top Products
18
Operation
You can load and eject a disc (as described below) only when the CRW2200UX
drive is turned on.
1
11
1 Open the disc tray by pressing the eject button on the CRW2200UX
drive’s front panel.
2
22
2 Place the disc onto the disc tray with its label or printing facing upward,
or remove the disc from the disc tray.
3
33
3 Close the disc tray by pressing the eject button again. You can also
gently push it closed.
Load or unload the disc after the disc tray has fully opened. Do not push
or pull the disc tray using excessive force. Doing so can damage the drive
or the disc.
Note
The disc tray does not open while a disc is being read or written.
Loading/Ejecting a Disc
12