Filter
Top Products
Printer Configuration
Mark Sensitivity
Mark Sensitivity
0
Possible Values: -10 …0* …+10
This feature allows the Black Mark/Paper Fault sensor to be adjusted to allow for variations in media materials
and Black Mark printing methods. The following list will help determine if, and how, the Mark Sensitivity
should be adjusted.
• If the printer is not detecting black marks reliably, set the Mark Sensitivity to a lower value.
• If the printer is detecting false paper fault conditions, set the Mark Sensitivity to a higher value.
• If the printer is detecting black marks where none exist, set the Mark Sensitivity to a higher value.
Gap Sensitivity
Gap Sensitivity
0
Possible Values: -10 …0* …+10
This feature is used to adjust the sensing of gaps between labels when using precut labels that are provided on a
removable backing. The following method should be used to adjust the gap sensor.
• If the printer is not detecting gaps between labels reliably, set the Gap Sensitivity to a higher value.
• If the printer is detecting gaps where none exist, set the Gap Sensitivity to a lower value.
Note: This feature is only available in MtP400 LP models.
Interface Menu
INTERFACE MENU
Current Host I/O
After entering Setup as described earlier in “
Setup Basics”, press the Advance Button until “INTERFACE
MENU
” is displayed on the top line.
The bottom line displays the currently selected host interface. The Interface Menu provides access to the
features that may be configured for the currently selected interface.
Note that the Serial interface is standard in all MtP400 series printers. If another, optional interface such as
IrDA, Bluetooth, or Wi-Fi is installed, you may select between the Serial interface and the optional interface by
pressing the
Arrow Button. Once the desired interface is displayed, you may do one of the following:
press the
Enter Button to review and/or change the features related to the selected interface, or
press the
Advance Button to advance to the OPTIONS MENU
Pressing the
Enter Button will advance through the following features for the selected Interface in the order
listed below.
Please refer to “
Interfacing To A Host Computer” on page 31 for additional information.
21