Zebra Technologies MtP400 Printer User Manual


 
Printer Configuration
Tunnel Port Number
Tunnel Port#
08023
Possible Values: 00000 … 08023* … 65384
This feature specifies the TCP/IP port to be used for data that is to be printed..
To advance through the character positions, press the
Advance Button. To change the character at the current
position, press the
Increment Button.
Note: This feature is available in printers with firmware revision 2.0 and higher.
Options Menu
OPTIONS MENU
The
OPTIONS MENU contains features that affect how the printer operates regardless of how features in other
menus have been set.
After entering Setup as described earlier in “Setup Basics”, press the Advance Button until “OPTIONS
MENU
” is displayed on the top line. You may now do one of the following:
press the Enter Button to review and/or change the features available, or
press the Advance Button to advance to the TEST MENU
Pressing the Enter Button will advance through the following features in the order shown below.
Maximum Format Number
Max Formats
Format 1
Possible Values: Format 1* … Format 5
This feature sets the highest Format number to be displayed in the Format Menu. This allows the operator to
see only the formats that are in use rather than having to potentially sort through several unused formats.
Note that when changing the value of this feature, you may not select a value less than the value currently set in
the Format Menu.
29