Filter
Top Products
Label/Tag Specifications
46
Label/Tag Width 1.12” to 4.65” (28 mm to 118 mm)
Label/Tag Length
0.38” to 22” (10 mm to 559 mm) with standard memory
0.5” (13 mm) to 22” (559 mm) in peel-off mode
Interlabel Gap
0.08” to 0.16” (2 mm to 4 mm)
Recommended: 0.118” (3 mm)
Label/Tag Thickness .003” to .0075” (.08 mm to .19 mm)
Label
Roll
Size
Max. Outer
Diameter
5” (127 mm)
Inner Core
1” (25.4 mm)
Media Requirements
ü
Use Zebra-brand thermal transfer media that is outside
wound. Media may be reflective (black mark) sensing
or transmissive sensing, die-cut, notched, or
continuous.
ü
For die-cut labels, use only full auto dies.
ü Notched media must have a 0.5” (13 mm) wide x
0.094” (2.4 mm) long cutout located in the center of
the roll. The reflective media black marks must be
located in the center of the roll.
Minimum Black Mark Dimensions:
ü Mark width: 0.5” (13 mm) centered and perpendicular
to the edge of the media.
ü Mark length: 0.094” (2.4 mm) parallel to the bottom of
the media.