Filter
Top Products
Note: You must change the VoIP Subsystem IP/DNS configuration settings first to the new subnet if you
change the LAN subnet of your X6v.
HTTP / Telnet / FTP Server
Parameter Description Default
HTTP Server Access Enable
Enable or disable access to Configuration
Manager
Enabled
HTTP Server Port
Assigned port number for HTTP server 8080
Telnet Server Enable
Enable or disable remote access via
telnet
Enabled
Telnet Server Port
Assigned port number for Telnet server 8023
FTP Server Enable
Enable or disable remove access via ftp Enabled
FTP Server Port
Assigned port number for FTP server 8021
Note: External access may be blocked by your X6v firewall.
STUN Settings
Parameter Description Default
STUN Enable
Enables or disables use of STUN for
discovery of Network Address Translation
(NAT) mapping
Enabled
STUN Server Address
Fully qualified domain name (including
optional port number) for the STUN server
Firmware and Configuration Update Settings
Parameter Description Default
Update Server Domain Name
Fully qualified domain name
(including an optional port number)
for the update server
zoom.voipconfigure.com:
5080
Automatic Configuration Update Enable
Control to enable automatic
updating of configuration
Enabled
Automatic Configuration Update on
Reboot
Control to enable automatic update
of configuration on reset
Enabled
Automatic Configuration Update (SIP)
Control to enable automatic update
on receipt of SIP message
Disabled
Configuration Update Message on
Request
SYSLOG message body sent when
requesting a configuration update
Configuration update
requested
Configuration Update Message on
Success
SYSLOG message body sent when
configuration update completed
successfully
Configuration update
successful
Configuration Update Message on
Failure
SYSLOG message body sent when
configuration update completed
unsuccessfully
Configuration update
failed
10 X6v VoIP Features Technical Reference