Filter
Top Products
CODEC Command Strings
The CODEC initialization commands provide a method to set up the device for unusual conditions. Do not
change the default value unless the factory has instructed you to do so.
Parameter Description Default
Initialization Commands
Specifies device setup for unusual
conditions.
100
Other Parameters
Parameter Description Default
Hook Debounce (units of 10 ms)
The range is 0 to 65535 ms 10 (that is, 100 ms)
Ring Debounce
The range is 0 to 65535 ms 20 ms
Disconnect Debounce
The range is 0 to 65535 ms 40 ms
Reconnect Debounce
The range is 0 to 65535 ms 20 ms
Chapter 7: Regionalization 33