Filter
Top Products
92 Bridging Configuration
have to re-negotiate the protocol and recompile the tables when
the line is brought back up.
Once you have completed filling in the Network Layer Options
Menu, press ENTER to return to Menu 11. Press ENTER at the
message: Press ENTER to Confirm ... to save your selections, or
press ESC at any time to cancel your selections.
Default Dial-In Setup for Bridge
There is only one parameter you need to fill out for Bridging
applications.
• PPP Options: Recv. Authen. - verify that this field is
not
set
to None Bridging applications must have some sort of
authentication turned on in order to match to a Remote Node.
Once you have completed filling in the menu, press ENTER at the
message: Press ENTER to Confirm ... to save your selections, or
press ESC at any time to cancel your selections.
Bridge Static Route Setup
You can configure Bridge static routes for your Bridging
applications.