Filter
Top Products
Installation 23
normal phone line. It should be noted that this is optional and is not
required for you to run other applications using your Prestige.
Plug one end of the telephone cord from a phone, fax, or modem
into the socket on the rear panel of the Prestige labeled PHONE 1
or PHONE 2.
In order to receive incoming calls using a device connected to
PHONE ports, you need to enter Phone1 or Phone2 in the Analog
Call field under the desired telephone number (e.g., 1
st
phone #) in
SMT Menu 2 - ISDN Setup. See Collecting ISDN Phone Line
Information in Chapter 2 for more details.
Connecting an Ethernet Cable to your Prestige
The Prestige supports two types of Ethernet connections. The
connection procedure differs for each one; follow the one that is
appropriate for your installation.
• UTP
The UTP port is used to connect to a 10Base-T network. 10Base-T
networks use Unshielded Twisted Pair (UTP) cable and RJ-45
connectors that look like a bigger telephone plug with 8 pins. Two
types of gray Ethernet cables come with the package:
• Straight through cable (white tag): Connect your Prestige to
a 10Base-T hub.
• Crossover cable (red tag): Connect your Prestige to your
computer directly without a hub.
22
11
27(27(
,
)7+,6&$%/(,686('72&211(&7
,6'1
,70$<'$0$*(<285
3
5(67,*(
• AUI
The AUI port (the connector with 15 pins) is used to connect the
Prestige to a 10Base5 (thicknet) network.