Filter
Top Products
34 Installation
subaddress. Or it will be answered as A/B Adapter 2 call
when there is a match for the A/B Adapter 2 subaddress. If
A/B Adapter 1 or 2 subaddress is specified, then the analog
call will not be answered. This option is only available for
DSS1.
• Don’t care - all numbers accepted - All digital calls,
including global calls (without CDPN and CDSA in the call
setup), to any Called Party Number will be answered. All
analog calls will be routed to A/B Adapter 1, A/B Adapter
2, or not answered. This depends on the setting of Analog
Call Routing. All global analog calls will either accept or
not answer them depending on the setting of Global Analog
Call.
9. Analog Call Routing - All analog calls will be routed to A/B
Adapter 1 if the setting is A/B Adapter 1. Or they will be
routed to the A/B Adapter 2 if the setting is A/B Adapter 2. Or
they will not be answered if the setting is Ignore.
10. Global Analog Call - All global analog calls will be answered
and routed to the A/B Adapter 1 or A/B Adapter 2 (the setting
in the filed of Analog call routing) if the setting is Accept. Or
they will not be answered if the setting is Ignore.
When you are finished, press ENTER at the message: Press
ENTER to Confirm ... to save your selections, or press ESC to
cancel. When you press ENTER, the Prestige will use the
information that you entered to initialize the ISDN link to the
telephone company switch. It should be noted that whenever the
switch type is changed, the ISDN initialization will take slightly
longer. In addition, if you are using the U-interface, the system will
also take slightly longer to initialize.
At this point, the Prestige will ask if you wish to test to check if
your ISDN line has been successfully connected to your Prestige. If
you select Yes, the Prestige will perform a loop-back test to check