Filter
Top Products
Bridging Configuration 93
Figure 9-3 Menu 12.4 - Bridge Static Route
1.
Route Name
- For identification purposes enter a name for the
bridge static route.
2.
Active
- Indicates whether the static route is active or not.
3.
Ether Address
-Enter the MAC address of the destination
device that you wish to bridge your packets to.
4.
IP Address
- If available, enter the IP address of the
destination device that you wish to bridge your packets to.
5.
Gateway Node
- Enter the number (1-4) of the Remote Node
that is linked to this static route. When an incoming packet’s
destination Ether (MAC) address matches the value entered
above, then it will trigger a call to this Remote Node.
Once you have completed filling in the menu, press
ENTER
at the
message: Press ENTER to Confirm ... to save your selections, or
press
ESC
at any time to cancel your selections.