Filter
Top Products
TCP/IP Configuration 75
destination of 204.5.1.64/26 with the gateway address being that of
the Remote Node (204.5.1.150).
Figure 7-4 Static Routing Example
Note that in normal circumstances, the Prestige will have adequate
routing information after you configure the Internet access and
Remote Nodes; you do not need to configure additional static
routes. You will need to configure static routes only for unusual
cases, e.g., subnetting. To create an additional static routes for IP,
use Menu 12, Static Route Setup as shown below:
Figure 7-5 Menu 12 - Static Route Setup - Main Menu