Filter
Top Products
Installation 35
the ISDN line. If the loop-back test fails, note the error message
that you receive and take the appropriate troubleshooting action.
Figure 3-10 ISDN Loop-Back Test Screen
Ethernet Setup
Menu 3 is used to enter Ethernet related information. Depending
on the protocols (TCP/IP or IPX) on your LAN, you will need to
configure each protocol separately.
General Ethernet Setup
This menu determines the type of Ethernet interface you are using
as well as the filter sets you wish to implement to monitor your
Ethernet traffic. From Menu 3 - Ethernet Setup, enter
1
to go to
menu 3.1 -General Ethernet Setup.