Filter
Top Products
22 Installation
After the Prestige has been successfully installed, you can modify
the configuration through a remote Telnet connection. See Chapter
13 for detailed instructions on using Telnet to configure your
Prestige.
Connecting the RS-232 Cable to your Prestige
One 9-25 pin adapter is included in your package. To connect a
RS-232 cable, connect the 9-pin end of the cable to the DTE port
on the back panel of the Prestige. Connect the other end to the RS-
232 cable connected to the serial port (COM1, COM2, or any other
COM port) of your computer.
Connecting an ISDN Line to your Prestige
Plug one end of your ISDN phone line which is included in your
package into the socket on the rear panel of the Prestige labeled
ISDN and the other end into the ISDN wall jack.
• S/T interface - This can only connect to your NT-1 (Network
Termination) device.
22
11
27(27(
'
212781'(5$1<&,5&8067$1&(6&211(&7',5(&7/<727+(
,6'1
:$//
-$&.
• U interface - This allows you to connect directly to your ISDN
wall jack.
22
11
27(27(
7
+(
,6'1
-$&.,6)25
,6'1
/,1(&211(&7,2121/<
&
211(&7,212)$3+21(
/,1(0$<5(68/7,1'$0$*(72<285
3
5(67,*(
$$
77(17,2177(17,21
/
$),&+(
,6'1
(67'(67,1e(81,48(0(173285/$&211(;,2168581(/,*1(
51,6/
$&211(;,2168581(/,*1(7e/e3+21,48(3(87(1'200$*(59275(
$'$37$7(85'(7(50,1$/
Connecting a Telephone/Fax to your Prestige
If you wish, you can connect a regular telephone, fax machine, or a
modem to your Prestige to be used for analog calls just like a