Filter
Top Products
Chapter 8 - Special Functions
8-2
********
Password: (Enter new supervisor password)
********
Verify: (Enter the new supervisor password again)
********
OK
The command AT*Hn will modify the nth user password. You will be prompted
to enter the supervisor password first and then be prompted to enter the nth user
password.
The command AT*V will list the 50 user passwords and the supervisor password
on the screen for viewing. Again, you will be prompted to enter the supervisor
password first.
The following commands will enable different types and levels of security:
Command Function
*G0
Disable security function.
*G1
Enable type 1 and level 1 security, with password check.
*G2
Enable type 1 and level 2 security, with password check
and callback.
*G3
Enable type 2 and level 1 security, with password check.
*G4
Enable type 2 and level 2 security, with password check
and callback.
*G5
Enable type 2 and level 2 security, with password check
and callback, remote site enters the callback number.
Note: Before the security type or level changed, the modem requires
the supervisor password.
For type 2 security, the remote site will be prompted to enter the user password.
A maximum of 3 tries in 40 seconds is allowed. If a correct password is not
entered within this time limit the line will be disconnected. If the remote site is to
enter the callback number it will be prompted to do so.
Remote Configuration
Remote configuration on the Omni 288S is provided as a profile by profile
batch mode. When on-line, the remote modem’s current configuration or one of its
profiles can be read into one of the local modem’s user profiles. This profile is
modified locally and the line can be disconnected during this time.