Filter
Top Products
Chapter 8 - Special Functions
8-5
CALLER NUMBER: 7135551414 or CALLER NAME: Jack
Smith
RING
In the multiple message format, if the caller’s number and name are available, the
ring message will display both:
RING
TIME: MM-DD hh:mm
CALLER NUMBER: <Caller_ID>
CALLER NAME: <Caller_Name>
RING
Here is an example:
RING
TIME: 04-28 12:30
CALLER NUMBER: 7135551414
CALLER NAME: Jack Smith
RING
If the caller number and name are not available, the ring message will appear as
follows:
RING
TIME: 04-28 12:30
REASON FOR NO NUMBER: OUT_OF_AREA
REASON FOR NO NAME: PRIVACY
RING
The last CND message that the modem received can be displayed by using the
AT*T command.
Setting S48.0=1 will cause the modem to report CND information in its ASCII
coded hexadecimal raw data format. The DTE software is responsible for
explaining the data.
Notes: Please refer to the Bellcore Technical Advisory document AT-
NWT-000030 for the exact data format. The above Caller ID
scheme applies to the North America area. Different countries
may employ different Caller ID schemes, check if the scheme
used in your country is supported before using the Caller ID