Filter
Top Products
Prestige 652 ADSL Security Router
25-10 VPN/IPSec Setup
Table 25-4 Menu 27.1.1 — IPSec Setup
FIELD DESCRIPTION EXAMPLE
The VPN tunnel has to be rebuilt if this IP address changes.
Secure
Gateway Addr
Type the WAN IP address or the domain name (up to 31 characters) of the
IPSec router with which you’re making the VPN connection.
Set this field to 0.0.0.0 if the remote IPSec router has a dynamic WAN IP
address (the
Key Management
field must be set to
IKE
, see later). See
the Secure Gateway Address section for more details.
Zw50test.com.
tw
Protocol Enter 1 for ICMP, 6 for TCP, 17 for UDP, etc. 0 is the default and signifies
any protocol.
0
Local Local IP addresses must be static and correspond to the remote IPSec
router’s configured remote IP addresses.
Two active SAs cannot have the local and remote IP address(es) both the
same. Two active SAs can have the same local or remote IP address, but
not both. You can configure multiple SAs between the same local and
remote IP addresses, as long as only one is active at any time.
Addr Type
Press [SPACE BAR] to choose
SINGLE
,
RANGE
, or
SUBNET
and press
[ENTER]. Select
SINGLE
with a single IP address. Select
RANGE
for a
specific range of IP addresses. Select
SUBNET
to specify IP addresses on
a network by their subnet mask.
SINGLE
IP Addr Start
When the
Addr Type
field is configured to
Single
, enter a (static) IP
address on the LAN behind your Prestige.
When the
Addr Type
field is configured to
Range
, enter the beginning
(static) IP address, in a range of computers on your LAN behind your
Prestige.
When the
Addr Type
is configured to
SUBNET
, this is a (static) IP
address on the LAN behind your Prestige.
192.168.1.35
End
When the
Addr Type
field is configured to
Single
, this field is
N/A
.
When the
Addr Type
field is configured to
Range
, enter the end (static) IP
address, in a range of computers on the LAN behind your Prestige.
When the
Addr Type
field is configured to
SUBNET
, this is a subnet mask
on the LAN behind your Prestige.
192.168.1.38
Port Start 0 is the default and signifies any port. Type a port number from 0 to 65535.
Some of the most common IP ports are:
21, FTP; 53, DNS; 23, Telnet; 80, HTTP; 25, SMTP; 110, POP3
0