Filter
Top Products
Prestige 652 ADSL Security Router
Remote Node Configuration 5-3
Figure 5-2 Menu 11.1 — Remote Node Profile
In Menu 11.1 – Remote Node Profile, fill in the fields as described in the following table.
Table 5-1 Remote Node Profile Menu Fields
FIELD DESCRIPTION EXAMPLE
Rem Node Name Type a unique, descriptive name of up to eight characters for this
node.
ChangeMe
Active
Press [SPACE BAR] and then [ENTER] to select
Yes
to activate or
No
to deactivate this node. Inactive nodes are displayed with a
minus sign “–“.
Yes
Encapsulation
RFC-1483
is the default configuration, press [SPACE BAR] and
then [ENTER] to select either
PPPoE
,
PPP
oA (RFC-2364, PPP
Encapsulation over ATM Adaptation Layer 5) or
ENET ENCAP
.
PPP
oA refers to RFC-2364 (PPP Encapsulation over ATM Adaptation
Layer 5).
PPPoE
refers to RFC-2364 (Point-to-Point Protocol over Ethernet).
If
RFC-1483
(Multiprotocol Encapsulation over ATM Adaptation
Layer 5) or
ENET
ENCAP
is selected, then the
Rem
Login
,
Rem
Password
,
My Login
,
My Password
, Telco Options and
Idle
Timeout
fields are not applicable (
N/A
).
PPPoA
Multiplexing Press [SPACE BAR] and then [ENTER] to select the method of
multiplexing that your ISP uses, either
VC-based
or
LLC-based
.
LLC-based
Menu 11.1 - Remote Node Profile
Rem Node Name= ChangeMe
Active= Yes
Encapsulation= PPP
Multiplexing= LLC-based
Service Name= N/A
Incoming:
Rem Login=
Rem Password= ********
Outgoing:
My Login=
My Password= ********
Authen= CHAP/PAP
Route= IP
Bridge= No
Edit IP/Bridge= No
Edit ATM Options= No
Telco Option:
Allocated Budget(min)= 0
Period (hr)= 0
Schedule Sets= N/A
Nailed-Up Connection= N/A
Session Options:
Edit Filter Sets= No
Idle Timeout (sec)= 0
Press ENTER to Confirm or ESC to Cancel: