Filter
Top Products
Prestige 652 ADSL Security Router
5-4 Remote Node Configuration
FIELD DESCRIPTION EXAMPLE
Service Name When using PPPoE encapsulation, type the name of your PPPoE
service here.
N/A
Incoming:
Rem Login
Type the login name that this remote node will use to call your
Prestige. The login name and the
Rem
Password
will be used to
authenticate this node.
Rem Password Type the password used when this remote node calls your
Prestige.
Outgoing:
My Login
Type the login name assigned by your ISP when the Prestige calls
this remote node.
My Password Type the password assigned by your ISP when the Prestige calls
this remote node.
This field sets the authentication protocol used for outgoing calls.
Options for this field are:
CHAP
/
PAP
– Your Prestige will accept either
CHAP
or
PAP
when
requested by this remote node.
CHAP
– accept
CHAP
(Challenge Handshake Authentication
Protocol) only.
Authen
PAP
– accept PAP (Password Authentication Protocol) only.
PAP
Route
This field determines the protocol used in routing. Options are
IP
and
None.
IP
Bridge When bridging is enabled, your Prestige will forward any packet
that it does not route to this remote node; otherwise, the packets
are discarded. Select
Yes
to enable and
No
to disable.
No
Edit IP/Bridge
Press [SPACE BAR] to select
Yes
and press [ENTER] to display
Menu 11.3 – Remote Node Network Layer Options
.
No
Edit ATM Options
Press [SPACE BAR] to select
Yes
and press [ENTER] to display
Menu 11.6 – Remote Node ATM Layer Options
.
No
Telco Option
Allocated Budget
(min)
This sets a ceiling for outgoing call time for this remote node. The
default for this field is 0 meaning no budget control.
0
(default)
Period (hr) This field is the time period that the budget should be reset. For
example, if we are allowed to call this remote node for a maximum
of 10 minutes every hour, then the
Allocated Budget
is (10
minutes) and the
Period (hr)
is 1 (hour).
0
(default)