Filter
Top Products
Prestige 652 ADSL Security Router
General Setup 3-3
Domain Name Enter your domain name here (if you have one). If you leave this field
blank, the ISP may assign a domain name via DHCP. You can go to
menu 24.8 and type "sys domain name" to see the current domain
name used by your router.
If you want to clear this field just press [SPACE BAR] and then
[ENTER]. The domain name entered by you is given priority over the
ISP assigned domain name.
zyxel.com.tw
Edit Dynamic DNS
Press [SPACE BAR] and then [ENTER] to select
Yes
or
No
(default).
Select
Yes
to configure
Menu 1.1 — Configure Dynamic DNS
discussed next.
No
(default)
Route IP
Set this field to
Yes
to enable or
No
to disable IP routing. You must
enable IP routing for Internet access.
Yes
Bridge Turn on/off bridging for protocols not supported (for example, SNA) or
not turned on in the previous
Route IP
field. Select
Yes
to turn
bridging on; select
No
to turn bridging off.
No
3.3.1 Configuring Dynamic DNS
To configure Dynamic DNS, go to Menu 1 — General Setup and press [SPACE BAR] to select Yes in
the Edit Dynamic DNS field. Press [ENTER] to display Menu 1.1— Configure Dynamic DNS (shown
next).
Figure 3-2 Configure Dynamic DNS
Menu 1.1 - Configure Dynamic DNS
Service Provider= WWW.DynDNS.ORG
Active= Yes
Host=
EMAIL=
USER=
Password= ********
Enable Wildcard= No
Press ENTER to confirm or ESC to cancel: