Filter
Top Products
Chapter 23 Authentication & Accounting
GS-4012F/4024 User’s Guide
195
23.3.1 Attributes Used for Authentication
The following sections list the attributes sent from the Switch to the RADIUS server when
performing authentication.
23.3.1.1 Attributes Used for Authenticating Privilege Access
User-Name
- the format of the User-Name attribute is $enab#$, where # is the privilege level
(1=14)
User-Password
NAS-Identifier
NAS-IP-Address
23.3.1.2 Attributes Used to Login Users
User-Name
User-Password
NAS-Identifier
NAS-IP-Address
23.3.1.3 Attributes Used by the IEEE 802.1x Authentication
User-Name
NAS-Identifier
NAS-IP-Address
NAS-Port
NAS-Port-Type
- This value is set to Ethernet(15) on the Switch.
Calling-Station-Id
Frame-MTU
EAP-Message
State
Message-Authenticator
23.3.2 Attributes Used for Accounting
The following sections list the attributes sent from the Switch to the RADIUS server when
performing authentication.
23.3.2.1 Attributes Used for Accounting System Events
NAS-IP-Address
NAS-Identifier
Acct-Status-Type
Acct-Session-ID
- The format of Acct-Session-Id is date+time+8-digit sequential number, for
example, 2007041917210300000001. (date: 2007/04/19, time: 17:21:03, serial
number: 00000001)
Acct-Delay-Time