Filter
Top Products
Chapter 45 Introducing Commands
GS-4012F/4024 User’s Guide
343
45.12.3 General Configuration Mode
The following table lists the commands in Configuration (or Config) mode.
write memory Saves current configuration to the
configuration file the Switch is
currently using.
13
<index> Saves current configuration to the
specified configuration file on the
Switch.
13
Table 138 Command Summary: Enable Mode (continued)
COMMAND DESCRIPTION PRIVILEGE
Table 139 Command Summary: Configuration Mode
COMMAND DESCRIPTION PRIVILEGE
aaa accounting commands
<privilege>
stop-only
tacacs+
Enables accounting of command
sessions and specifies the
minimum privilege level for which
command sessions should be
recorded.
13
commands
<privilege>
stop-only
tacacs+
[broadcast]
Enables sending accounting
information for command
sessions to all configured
accounting servers at the same
time.
13
dot1x <start-
stop|stop-only>
<radius|tacacs+
>
Enables accounting of IEEE
802.1x authentication sessions
and specifies the mode and
protocol method.
13
dot1x <start-
stop|stop-only>
<radius|tacacs+
> [broadcast]
Enables sending accounting
information for IEEE 802.1x
authentication sessions to all
configured accounting servers at
the same time.
13
exec <start-
stop|stop-only>
<radius|tacacs+
>
Enables accounting of
administrative sessions via SSH,
Telnet and console port and
specifies the mode and protocol
method.
13
exec <start-
stop|stop-only>
<radius|tacacs+
> [broadcast]
Enables sending accounting
information for administrative
sessions via SSH, Telnet and
console port sessions to all
configured accounting servers at
the same time.
13
system
<radius|tacacs+
>
Enables accounting of system
events and specifies the protocol
method.
13
system
<radius|tacacs+
> [broadcast]
Enables sending accounting
information for system events to
all configured accounting servers
at the same time.
13