Filter
Top Products
Chapter 45 Introducing Commands
GS-4012F/4024 User’s Guide
336
renew dhcp
snooping
database
<tftp://host/
filename>
Loads dynamic bindings from the
specified DHCP snooping
database.
13
show aaa authentication Displays whether authentication
and privilege checking is enabled
on the Switch and what methods
are used for authentication.
3
authentication
enable
Displays the authentication
method(s) for checking privilege
level of admnistrators.
3
authentication
login
Displays the authentication
methods for administrator login
accounts.
3
accounting Displays accounting settings
configured on the Switch.
3
accounting
commands
Displays accounting settings for
recording command events.
3
accounting dot1x Displays accounting settings for
recording IEEE 802.1x session
events.
3
accounting exec Displays accounting settings for
recording administrative sessions
via SSH, Telnet or the console
port.
3
accounting system Displays accounting settings for
recording system events, for
example system shut down, start
up, accounting enabled or
accounting disabled.
3
accounting update Display the update period setting
on the Switch for accounting
sessions.
3
alarm-status Displays alarm status and
configuration.
0
arp inspection Displays ARP inspection
configuration details.
3
filter Displays the current list of MAC
address filters that were created
because the Switch identified an
unauthorized ARP packet.
3
filter [<mac-
addr>] [vlan
<vlan-id>]
Displays the current list of MAC
address filters based on the MAC
address or VLAN ID contained in
the filter.
3
interface port-
channel <port-
list>
Displays the ARP inspection
settings for the specified port(s).
3
log Displays the log settings
configured on the Switch. It also
displays the log entries recorded
on the Switch.
3
Table 138 Command Summary: Enable Mode (continued)
COMMAND DESCRIPTION PRIVILEGE