Filter
Top Products
Chapter 45 Introducing Commands
GS-4012F/4024 User’s Guide
364
priority <1-
254>
Sets the priority of the uplink-
gateway.
13
secondary-
virtual-ip <ip>
Sets the secondary VRRP virtual
gateway IP address.
13
service-
control
ftp <socket-
number>
Allows FTP access on the
specified service port.
13
http <socket-
number> <timeout>
Allows HTTP access on the
specified service port and
defines the timeout period.
13
https <socket-
number>
Allows HTTPS access on the
specified service port.
13
icmp Allows ICMP management
packets.
13
snmp Allows SNMP management. 13
ssh <socket-
number>
Allows SSH access on the
specified service port.
13
telnet <socket-
number>
Allows Telnet access on the
specified service port.
13
snmp-server [contact <system
contact>]
[location <system
location>]
Sets the geographic location and
the name of the person in charge
of this Switch.
13
get-community
<property>
Sets the get community. 13
set-community
<property>
Sets the set community. 13
trap-community
<property>
Sets the trap community. 13
trap-destination
<ip>
Sets the IP addresses of up to
four stations to send your SNMP
traps to.
13
trap-destination
<ip>
[udp-port
<socket-
number>]
[version
<v1v2cv3][usern
ame<name>]
Sets the IP address of an SNMP
manager. You can configure up
to four managers to send your
SNMP traps to.
13
trap-destination
<ip> enable traps
Enables sending SNMP traps to
a manager.
13
aaa Enables sending all AAA type
traps to a manager.
13
aaa <options> Enables sending specific AAA
traps to a manager. The options
are “authentication” or
“accounting”.
13
help Displays help information for
SNMP trap commands.
13
Table 139 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION PRIVILEGE