Filter
Top Products
Chapter 45 Introducing Commands
GS-4012F/4024 User’s Guide
342
known-hosts Displays known SSH hosts
information.
3
key
<rsa1|rsa|dsa>
Displays internal SSH public and
private key information.
3
session Displays current SSH session(s). 3
subnet-vlan Displays subnet based VLAN
settings on the Switch.
3
system-
information
Displays general system
information.
0
tacacs-server Displays TACACS+ server
settings.
3
tacacs-accounting Displays TACACS+ accounting
server settings.
3
time Displays current system time and
date.
3
timesync Displays time server information. 3
trunk Displays link aggregation
information.
3
version Displays the firmware version
running on the Switch.
0
flash Displays the firmware version on
the flash memory of the Switch.
0
vlan Displays the status of all VLANs. 3
<vlan-id> Displays the status of the
specified VLAN.
3
vlan-stacking Displays VLAN stacking settings. 3
vlan1q gvrp Displays GVRP settings. 3
port-isolation Displays port isolation settings. 3
ssh <1|2>
<[user@]dest-ip>
Connects to an SSH server with
the specified SSH version.
0
[command </>] Connects to an SSH server with
the specified SSH version and
addition commands to be
executed on the server.
0
test interface port-
channel <port-
list>
Performs an internal loopback test
on the specified ports.
13
traceroute <ip|host-name>
[in-band|out-of-
band|vlan <vlan-
id>][ttl <1-255>]
[wait <1-60>]
[queries <1-10>]
Determines the path a packet
takes to a device.
0
help Displays help information for this
command.
0
Table 138 Command Summary: Enable Mode (continued)
COMMAND DESCRIPTION PRIVILEGE