Filter
Top Products
IES-5000/5005/6000 Support Notes
75
After the installation process is complete, start the daemon from the Start menu. A
screen displays as shown. In this example, assume that the syslog server’s IP address
is 192.168.1.77.
2. IES-5000 settings
logs and then save the settings.
CI command:
TGE1> sys syslog enable
TGE1> sys syslog server 192.168.1.77
TGE1> sys syslog facility 1
TGE1> config save
hen the DSL connection is up or down, the IES-5000 sends a log record to the
see the new entry in the syslog server. The following shows an
On the IES-5000, enable syslog logging and specify the IP address of the syslog
server (192.168.1.77 in this example). Specify where (Local 1 through Local 7) you
want to store the
W
syslog server. You can
example.
All contents copyright (c) 2008 ZyXEL Communications Corporation.