Filter
Top Products
P-334U/P-335U User’s Guide
Chapter 16 Remote Management Screens 185
CHAPTER 16
Remote Management Screens
This chapter provides information on the Remote Management screens.
16.1 Remote Management Overview
Remote management allows you to determine which services/protocols can access which
ZyXEL Device interface (if any) from which computers.
Note: When you configure remote management to allow management from the WAN,
you still need to configure a firewall rule to allow access. See the firewall
chapters for details on configuring firewall rules.
You may manage your ZyXEL Device from a remote location via:
• Internet (WAN only) • ALL (LAN and WAN)
• LAN only • Neither (Disable).
Note: When you choose WAN or LAN & WAN, you still need to configure a firewall
rule to allow access.
To disable remote management of a service, select Disable in the corresponding Server
Access field.
You may only have one remote management session running at a time. The ZyXEL Device
automatically disconnects a remote management session of lower priority when another
remote management session of higher priority starts. The priorities for the different types of
remote management sessions are as follows.
1 Telnet
2 HTTP
16.1.1 Remote Management Limitations
Remote management over LAN or WAN will not work when:
1 You have disabled that service in one of the remote management screens.
2 The IP address in the Secured Client IP Address field does not match the client IP
address. If it does not match, the ZyXEL Device will disconnect the session
immediately.