Filter
Top Products
Prestige 100L IDSL Router
Hardware Installation and Initial Setup 2-9
2.8 IDSL Setup
This section describes how to configure the IDSL using Menu 2 – IDSL Setup. From the Main Menu,
enter 2 to open Menu 2.
Figure 2-8 Menu 2 – IDSL Setup
The following table contains instructions on how to configure your IDSL setup.
Table 2-5 IDSL Setup Menu Fields
FIELD DESCRIPTION EXAMPLES
Service
Type
Since the Prestige can only act as an IDSL Client, there is only one
option available: IDSL Client.
IDSL Client
B Channel
Usage
There are three options available: Leased 128K and Leased 64K,
which is used to decide the IDSL line’s speed; or Switch 64K for
Ascend MAX TNT IDSL-module. When the P100L is connected to the
P1600 as the Client router, then this option cannot be set by the user
as it is set on the P1600.
Leased 128K /
Leased 64K /
Switch 64K
2.9 Ethernet Setup
This section describes how to configure the Ethernet-related information using Menu 3 – Ethernet Setup.
From the Main Menu, enter 3 to open Menu 3.
Menu 2 – WAN Port Setup
Service Type: IDSL Client
B Channel Usage= Leased 128K
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.