Filter
Top Products
Prestige 100L IDSL Router
4-6 Remote Node Setup
FIELD DESCRIPTION EXAMPLE
Information Protocol), and the default is Both. If set to Both, your
Prestige broadcasts its routing table on the WAN, and incorporate
RIP broadcasts by the other router into its routing table. If set to In
Only, your Prestige does not broadcast its routing table on the WAN;
if set to Out Only, your Prestige broadcasts its routing table but
ignores any RIP broadcast packets that it receives. If set to None,
your Prestige does not participate in any RIP exchange with other
routers. Usually, you should leave this parameter at its default of
Both and RIP propagates the routing information automatically.
Only/Out
Only/None
Version Press [space bar] to select the RIP version from RIP-1, RIP-2B and
RIP-2M.
RIP-2B/
RIP-2M/
RIP-1
Once you have completed filling in the Remote Node Network Layer Options Menu, press the [Enter] key
to return to Menu 11. Press the [Enter] key at the message [Press ENTER to Confirm . . .] to save your
configuration, or press the [Esc] key at any time to cancel.