Filter
Top Products
Prestige 100L IDSL Router
SNMP 7-1
Chapter 7
SNMP (Simple Network Management
Protocol)
This chapter takes you through SNMP Configuration Menu 22.
The SNMP is a protocol governing network management and the monitoring of network devices and their
functions. The Prestige 100L supports the utilization of SNMP to regulate the communication that occurs
between the manager station and the agent stations in a network. Basically, your Prestige, when connected
to the LAN, acts as an agent station. In this way, the manager station on your LAN can monitor your
Prestige as it would another station on the network. Keep in mind that SNMP is only available if TCP/IP is
configured.
Configuring Your Prestige For SNMP Support
The following steps describe a simple setup procedure for configuring SNMP management.
Figure 7-1 Menu 22 – SNMP Configuration
1. From the Main Menu, select option 22. SNMP Configuration. This brings you to Menu 22 – SNMP
Configuration.
2. You are prompted to enter the following information. Steps 3 to 7 describe the specific parameters
involved in the configuration. The parameters you have to fill in are indicated in bold type.
Menu 22 – SNMP Configuration
SNMP
Get Community= public
Set Community= public
Trusted Host= 0.0.0.0
Trap:
Community= public
Destination= 0.0.0.0
Press ENTER to Confirm or ESC to Cancel