Filter
Top Products
Prestige 100L IDSL Router
System Information10-2
10.1 System Status
The first selection, System Status, gives you information on the version of your system firmware and the
status and statistics of the ports, as shown in the following figure. System Status is a tool that can be used to
monitor your Prestige. Specifically, it gives you information on your system firmware version, number of
packets sent and number of packets received.
To get to the System Status:
Step 1. Enter number 24 to go to Menu 24 – System Maintenance.
Step 2. In this menu, enter number 1 to open System Maintenance – Status.
Step 3. There are two commands in Menu 24.1 – System Maintenance – Status. Entering 3 resets the
counters and the [Esc] key takes you back to the previous screen.
Figure 10-2 Menu 24.1 – System Maintenance – Status
Menu 24.1 - System Maintenance – Status
Chan
--
Link
Down
Type
0Kbps
TXPkts
0
RXPkts
0
Errors
0
CLU
0%
ALU
0%
Up Time
0:00:00
Total Up Time: 0:00:00 CPU load: 19.34%
Ethernet:
Status: 10M/Half Duplex
TX Pkts: 1538
RX Pkts: 66734
Collisions: 23
WAN
IP Address: 202.132.154.179
Press Command:
COMMANDS: 3-Reset Counters ESC-Exit