Filter
Top Products
Prestige 650 Series User’s Guide
25-2 Wireless LAN Setup
Figure 25-1 Menu 3.5 - Wireless LAN Setup
The following table describes the fields in this menu.
Table 25-1 Wireless LAN Setup Field Description
FIELD DESCRIPTION EXAMPLE
ESSID The ESSID (Extended Service Set IDentifier) identifies the service set the
wireless station is to connect to. Wireless stations associating to the Access
Point must have the same ESSID. Enter a descriptive name (up to 32
characters) for the wireless Service Set.
Wireless
Hide ESSID
Press [SPACE BAR] and select Yes to hide the ESSID in the outgoing
beacon frame so a station cannot obtain the ESSID through passive
scanning.
No
Channel ID Press [SPACE BAR] to select a channel. This allows you to set the
operating frequency/channel depending on your particular region.
CH01
2412MHz
RTS
Threshold
RTS(Request To Send) threshold (number of bytes) enables RTS/CTS
handshake. Data with its frame size larger than this value will perform the
RTS/CTS handshake. Setting this attribute to be larger than the maximum
MSDU (MAC Service Data Unit) size turns off the RTS/CTS handshake.
Setting this attribute to zero turns on the RTS/CTS handshake. Enter a
value between 0 and 2432.
2432
Frag.
Threshold
The threshold (number of bytes) for the fragmentation boundary for directed
messages. It is the maximum data fragment size that can be sent. Enter a
value between 256 and 2432.
2432
Menu 3.5- Wireless LAN Setup
ESSID= Wireless
Hide ESSIS = No
Channel ID= CH01 2412MHz
RTS Threshold= 2432
Frag. Threshold= 2432
WEP= Disable
Default Key= N/A
Key1= N/A
Key2= N/A
Key3= N/A
Key4= N/A
Edit MAC Address Filter= No
Press ENTER to Confirm or ESC to Cancel: