Filter
Top Products
Status Registers & Result Codes 93
Command Function & Description +Ref.
“W” dial modifier to wait for the dial tone.
(See also S41b4)
S7= Set duration, in number of seconds modem
waits for a carrier.
+060
S8= Set duration, in seconds, for pause (,) option in
Dial command and pause between command
re-executions for Repeat (>) command.
+002
S9= Set duration, in tenths of a second of remote
carrier signal before recognition (Ignored if in
non-FSK or half-duplex operation).
+006
S10= Set duration, in tenths of a second, modem
waits after loss of carrier before hanging up.
+007
S11= Set duration and spacing, in milliseconds, of
dialed Touch-Tones.
+070
Extended S-Registers "ATSn=x"
Command bit dec hex Function and description Ref.
S13= bit dec hex Bit-mapped register. +000
1 2 2 Capture modem
manufacturer information
during V.42 handshake, can
be displayed at ATI2 <Last
Speed/Protocol> line if
available (‘Flash’ or ‘
ZyXEL’ stands for ZyXEL
connection).
S14= bit dec hex Bit-mapped register: +002
0 0 0 Modem auto-handshake on
Originate mode.
*M0
1 1 Modem auto-handshake on
Answer mode.
*M1
1 0 0 Grant Remote Digital Loop- &T4