Filter
Top Products
Status Registers & Result Codes 99
Command bit dec hex Function and description Ref.
48 30 ATX6, error control result
code enabled.
X6
56 38 ATX7, error control result
code enabled.
X7
6 0 0 Display result code in
numeric format (see S35.7)
V0
64 40 Display result code in
verbose format.
V1
7 0 0 Modem returns result code Q0
128 80 Modem does not return
result code (see also S40.1)
Q1
S24= bit dec hex Bit mapped register.
2-0 0-7 0-7 Ring Volume control,
increment of 2 in decimal
value.
N0-7
6-4 16-
112
10-
70
Speaker volume control,
increments of 32 in decimal
value.
L0-7
S25= 0-
255
0-FF Specify the time delay that
DTR signal needs to be OFF
before it will be recognized,
in 10 ms units. If S25=0, the
delay time is set to 4 ms.
+000
S26= dec hex RTS/CTS delay. +000
0-
255
0-FF Set the delay, in 10
millisecond units between
the RTS and modem’s CTS
response in synchronous
mode (see ‘&Rn’
command).
&Rn
S27= bit dec hex Bit mapped register.
0-2 Modem error control.