Filter
Top Products
Special Functions 41
The following commands will enable
different types and Verify: (Enter the new
supervisor password again)
********
OK
The command AT*Hn will modify the nth user password. You will
be prompted to enter the supervisor password first and then be
prompted to enter the nth user password.
Levels of security:
Command Function
*G0 Disable security function.
*G1 Enable type 1 and level 1 security, with
password check.
*G2 Enable type 1 and level 2 security, with
password check and callback.
*G3 Enable type 2 and level 1 security, with
password check.
*G4 Enable type 2 and level 2 security, with
password check and callback.
*G5 Enable type 2 and level 2 security, with
password check and callback, remote site
enters the callback number.
OONOTE: BEFORE THE SECURITY TYPE OR LEVEL CAN BE CHANGED, THE MODEM
REQUIRES THE SUPERVISOR PASSWORD.
For type 2 security, the remote site will be prompted to enter the
user password. A maximum of 3 tries in 40 seconds is allowed. If a
correct password is not entered within this time limit the line will be
disconnected. If the remote site is to enter the callback number it
will be prompted to do so.