Filter
Top Products
60 Fax Operation
Command Value Description
+FK Regular fax abort command.
+FLID="string" Local ID string parameter.
+FLO=n Flow control options:
n=0 No flow control.
n=1 Set XON/XOFF software flow
control.
n=2 Set CTS/RTS hardware flow control.
+FLPL=n Document for polling command:
n=0 The DTE has no document available
for polling.
n=1 Indicate a document available for
polling.
+FMDL? Request DCE model.
+FMFR? Request DCE manufacturer .
+FMINSP=n Minimum phase C speed parameter:
n=0 2400 bps.
n=1 4800 bps.
n=2 7200 bps.
n=3 9600 bps.
n=4 12000 bps.
n=5 14400 bps.
+FPHCTO=
<value>
0-255 DTE Phase C response time-out:
Determine how long the DCE will wait
for a command after reaching the end
of data when transmitting in Phase C.
<value>=0 to 255; 100 ms units.
+FPTS=n Page transfer status.
n=1 Received page good.
n=2 Page bad; retrain requested.
n=3 Page good; retrain requested.
n=4 Page bad; procedure interrupt
requested.