Filter
Top Products
Fax Operation 67
Command Value Description
0-64
(HEX
value)
with negotiated number of pixels)
required for a page considered
acceptable. The percentage of good lines
would be computed by the equation:
100 x (<lc> - <bl>) / <lc>
lc: total line count as reported in the
+FPS: response.
bl: bad line count as reported in the
+FPS: response.
If the resulting value is less than the value
in <pgl>, the page is unacceptable.
cbl=
0-FF
(HEX
value)
Specify the maximum tolerable number of
consecutive bad lines. If this value is
exceeded for a given page, the DCE shall
consider the page unacceptable.
+FSP=n Enable polling command:
n=0 Disable polling.
n=1 Enable polling.
Class 2.0 Command Responses
Response Value Function and Description
+FCI:"CSI ID
string"
Report remote ID response, Called Station
ID.
+FCO Fax connection established response.
+FCS:vr,br,w
d,
ln,df,ec,bf,st
negotiated session parameters (DCS
frame information) response. Refer to
+FIS= comnd.
+FET:<ppm> Post page message response:
ppm=0 Another page next, same document.
ppm=1 Another document next.
ppm=2 No more pages of documents.
ppm=3 Another page next, same document,