Filter
Top Products
42 Special Functions
Remote Configuration
Remote configuration for your modem is provided as a profile by
profile batch mode. When on-line, the remote modem’s current
configuration or one of its profiles can be read into one of the local
modem’s user profiles. This profile is modified locally and the line
can be disconnected during this time.
Local profile modification is done by loading this profile as the
active settings and then modifying and saving the active settings
back to the profile. Then the connection is reestablished and the
profile transmitted to the remote modem.
Reading a remote profile b into a local profile a is achieved with the
command:
AT*Rab
a=0-3 Local user profile number
b=0-3 Remote user profile number
b=4 Remote active configuration
b=5 Remote factory default
Return the modems to on-line status again. The local modem can
upload (write) its profile to the remote modem’s profile and have
the remote modem reset from the new profile. This is done with the
command:
AT*Wab
a=0-3 Local user profile number
a=4 Local active configuration
a=5 Local factory default
b=0-3 Remote user profile number