Filter
Top Products
106 Status Registers & Result Codes
Command bit dec hex Function and description Ref.
between off-hook and
modem answering.
7 128 80 Modem hang-up if the line
condition does not permit
modem to run highest speed
set by ‘&Nn’ command.
S44= bit dec hex Bit mapped register. +000
3 8 8 ATDSn initiates auto-dial of
the stored numbers
consecutively until
connection is made.
DSn
4 16 10 DSR follows DTR (see also
S41.5).
&S1
5 32 20 Enable V.13 half-duplex
simulation in synchronous
mode.
6 64 40 When selected with ‘&B0’,
DTE speed fixed at 38400
when the link speed is above
9600. DTE speed fixed at
9600 if link speed is 7200,
DTE speed follows link
speed. When selected with
&B1, DTE speed fixed at
current rate when an ARQ
connection is made, when a
non-ARQ connection is
made, DTE speed follows
the link speed. (See also
S18)
&Bn
7 128 80 Enable UK (Australian,
Singapore, Indian, etc.,) type
short-to-short